Autosport Labs

UPDATE today, Finished and installed the vacuum reservoir and removed that "funny Bosch thing" with a Boost Engineering distributor plug...nice deal

damn you all are good, and so flashy with the math
Here's the beast

Just finished building my low buck vacuum tank, but now I'm thinking it might be too big...the measurements are 1 1/2" round by 5" long. Pictures will follow when finished. Also anyone ever use steel brake line J B Welded to the intakes instead of say 1/8" barbed fittings (to big and ...

yep....ordered one yesterday http://www.boostengineering.net/category_s/22.htm

yesterday I made a coil mount out of some scrap aluminum I had laying around and mounted it to my fan shroud, and today ran some wires from the coil and vr sensor to the rear package tray where I'll mount my electrical goodies

Well not really, but I did start on my EDIS ignition system, I got the hard parts gathered and after looking around and scratching my head, I got the pulley and vr sensor installed....it came out straight and true, more updates to follow.

I noticed the wire colors on my EDIS plug don't match the wire color schematics on your wiring diagram page, are yours just for reference and not color specific ?

but why did you swap out those Dells, you'll be slower now, or do you want the gas mileage? Cool build....

Well I fixed that problem, I just downloaded it to my PC then used a flash drive to install it to my laptop....cool

I'm getting incomplete download or damaged media (NSIS Error)...and on the firmware can't open it either, doesn't recognize the program that created it? any ideas

Okay, I'm new at this and will need help along the way I'm sure. I got my laptop squared away and will be purchasing my MegaJolt V4 soon. I am a little confused as to what software I need to install, I'm just trying to grasp this stuff before I order my unit. Thanks

Well that laptop fell through, but I'm looking at a Acer Aspire One notebook...anyone use one of those, I also see it doesn't have a serial port but you can get an adapter at Radio Shack

Well looks like I found a Dell laptop local for $100 so I'm good there, as for boost I'll be looking for 7 or 8psi (internal wastegate)...DannyP you said "If the MAP sensor that comes with the 'Jolt won't go high enough to cover your boost range, you can replace it with one that will" What...

DannyP, are you from Georgia or local to his area? Are you coming down to BugJam in November?

Well the story goes, I've turbo'ed my car before but it was draw through...this time I want to go blow through and was needing a boost retard box, like the MSD BTM which is around $400 :? So my thinking was I've heard so much about these crank trigger ignitions and thought I would check around befor...