Autosport Labs

Green corrosion! Is it installed in the engine bay? Marinated in salt water? :) your very close Brent :D afterall it is installed in a classic mini lots of condensation. No but seriously its installed on the inside on the bulkhead there also wasn't a lot of corrosion but enough to give a problem. P...

all sorted I took all 3 chips off the board one by one and cleaned them, they had a bit of green corrosion on them.

Paul

Hello, With the engine running and the computer connected, does it show runtime changes (RPM, load, etc?) this would be a good test for connecting. You should also be able to read the ignition map. What error do you see at the bottom of the window in the Megajolt tuning software? You should be usin...

Hi Installed for well over a year now and had no problems…….well still having no problems to be honest. My wife wanted here classic mini tuning for the events she is doing this year. She drove a fair way today to a rolling road but the tuner could not connect with the Megajolt. I thought that it wou...

Why would I get a misfire when its wet on the road, ive had problems before with a misfire but that was down to position and flex of crank sensor bracket. Its been fine for a while but now when it rains I have terrible problems. In the dry its great. I thought all the problems of having a classic mi...

Gilesy ive been texting you but i reckon i might have the wrong number Why would it start doing it all of a sudden when its been ok for ages? I'll have another check when he thaws out

Paul

The little fella has been running ok with the base map but of late hes's acting up a bit. I reckon i know what the problem is but thought i would run it past you all first. When you get to approx 3000rmp the revs just stop, you can't rev through it but if you let off and then get back on the gas it ...

http://i34.photobucket.com/albums/d133/mini-sprite/DSC00504.jpg http://i34.photobucket.com/albums/d133/mini-sprite/DSC00509.jpg http://i34.photobucket.com/albums/d133/mini-sprite/DSC00510.jpg http://i34.photobucket.com/albums/d133/mini-sprite/DSC00515.jpg http://i34.photobucket.com/albums/d133/mini...

I started it in safe mode and the software loaded straight away. I then had a look at the graphics adapter and tried to update it. I am using the latest one apparently :D. I noticed that i had 2 of the same graphics drivers loaded but no conflicts so i uninstalled one of them and rebooted the softwa...

system idle processes is top of the list and appears to be taking up 92% cpu usage when software is open. I tried the older software and it is still slow. Not sure what to do now

Paul

All my other apps run fine, ive got another mini that runs complete fuel and ignition on DTA and this runs fine. Where can i download the older version from i can only fine 4.0.1 newer version? Nothing is connected (serial was unplugged) to the laptop when i try the software. Ive tried the task mana...

Hello Paul, Can you provide the specifications of the machine you are running- Processor, memory, free hard drive space? if you don't know, list the manufacturer and model of the PC. What version of the Configuration software are you using? Are you using a USB-Serial adapter, or a regular serial po...

It takes an age for the software to start up and sometimes freezes, i'm running windows XP anything i can try to speed it up?

Paul

bloody hell Gilesy where the hell have you been :D . i got your number off Brumski and i sent you a text message, i thought you were ignoring me you inbred git :D All the brackets are fine and dandy i'll post pics up when i can get chester out of the garage. What size core plug did you use to block ...

A very simple install even for me who isn't the best with leccy stuff on cars. All running last night just need top check timing tonight if i have the time. Has anyone got a map for a 1330cc mini, stage 3 head, hif44 carb,sw5 cam,1.5 rockers, rc 40 exaust? Or maybe suggest one that is closer than th...