Search found 46 matches
- Wed Jul 07, 2010 6:00 am
- Forum: Operation
- Topic: 1132cc Mini Turbo - cutting out/missing... help
- Replies: 6
- Views: 6126
Hi Brent, Thanks, just cuts out, engine feels rough all the time. I moved the VR sensor closer to trigger wheel and it made no difference. Put the A/F meter on it and its LEAN AS @!$#$@#$ only when the problem occurs. So say your driving along fine, then all of a sudden it starts cutting out, the A/...
- Tue Jul 06, 2010 8:00 am
- Forum: Operation
- Topic: 1132cc Mini Turbo - cutting out/missing... help
- Replies: 6
- Views: 6126
Ok, can anyone read the logs? Showing anything?? Tell me what to look for if thats easier. Also, just noticed that the plugs are FOULED (carbon) pretty badly... they are BP5ES (non resistor type) I will replace them tomorrow with the BPR5ES plugs... I also did clean out the dashpot, etc replace oil ...
- Tue Jul 06, 2010 12:57 am
- Forum: Operation
- Topic: Mini 1275 not starting in limp home
- Replies: 1
- Views: 3793
Coil Pack plug #1 to Far RIGHT (radiator side) Coil Pack plug #2 to second from LEFT Coil Pack plug #3 to second from RIGHT Coil Pack plug #4 to far LEFT Or off engine side (same thing really) Engine Plug #1 radiator side to Coil plug #1 Engine Plug #2 second from right to Coil plug #3 Engine Plug #...
- Mon Jul 05, 2010 6:27 am
- Forum: Operation
- Topic: 1132cc Mini Turbo - cutting out/missing... help
- Replies: 6
- Views: 6126
Hi Brent, Thanks. Ive datalogged and replaced the MJ plug with a new one, soldered and wired very very well. Can you help me read the datalogs? There are 4 all up. I think it was towards the end of the second datalog where I was cruising up hill approx 3000rpm and it was cutting out... does it show ...
- Sat Jul 03, 2010 8:28 am
- Forum: Operation
- Topic: 1132cc Mini Turbo - cutting out/missing... help
- Replies: 6
- Views: 6126
1132cc Mini Turbo - cutting out/missing... help
Hi Guys, Need some ideas. Mini 1132cc Turbo, running MJ v4 I sold this car 18months ago, was going like MAD... bought it back a week ago. Problem is this Driving along, it seems to lose power, ie: wont rev, wont pull, then comes good. Regardless of rev range (sometimes 2000rpm, sometimes 4000rpm) id...
- Fri Nov 21, 2008 3:42 am
- Forum: Operation
- Topic: Noise/Interference caused by EDIS/MJ - Any ideas
- Replies: 10
- Views: 10238
Thanks mate - will do - the prob isnt the interior its the actual head unit and the earth point. I should move it anyway so might as well just bite the bullet as its tucked up and not a short earth anyway. I will try both the amp closer the the HU and also try the HU earth running back to the boot.....
- Fri Nov 21, 2008 1:31 am
- Forum: Operation
- Topic: Noise/Interference caused by EDIS/MJ - Any ideas
- Replies: 10
- Views: 10238
- Wed Nov 19, 2008 11:51 pm
- Forum: Operation
- Topic: Noise/Interference caused by EDIS/MJ - Any ideas
- Replies: 10
- Views: 10238
- Wed Nov 19, 2008 11:46 pm
- Forum: Operation
- Topic: Noise/Interference caused by EDIS/MJ - Any ideas
- Replies: 10
- Views: 10238
Hi Brent, Thanks your onto something- can you tell me more about the ground looping issue? Ie/ You mean I have too many earth points in the car? I have - about 6 and the amplifier is not grounded to chassis, only to neg on battery. - The head unit is grounded to chassis on its own point - 4 x guages...
- Wed Nov 19, 2008 10:08 pm
- Forum: Operation
- Topic: Noise/Interference caused by EDIS/MJ - Any ideas
- Replies: 10
- Views: 10238
Noise/Interference caused by EDIS/MJ - Any ideas
Hi Guys, I have a Leyland Mini - EDIS 4 and MJ 4 All running great... only issue is that I have massive interference in the stereo. Car off, its fine - its not a big system, 6" speakers + tweeters up front, 6x9s at back and a sub in the boot - front speakers and sub are amped only with a refere...
- Fri Nov 07, 2008 5:12 am
- Forum: Operation
- Topic: How do I read the Data log?
- Replies: 5
- Views: 4627
- Thu Nov 06, 2008 11:08 am
- Forum: Operation
- Topic: How do I read the Data log?
- Replies: 5
- Views: 4627
- Thu Nov 06, 2008 3:44 am
- Forum: Operation
- Topic: How do I read the Data log?
- Replies: 5
- Views: 4627
How do I read the Data log?
Hi Guys, I tried to find this but cannot... Can anyone point me to a page where it explains how to read the datalog? I have the datalog from my run but not sure I am reading it right - ie/ Accel Load, Load, Decel, etc... I want to work out exactly how much boost its showing and also at what RPM... E...
- Tue Oct 28, 2008 4:23 am
- Forum: Operation
- Topic: Vacuum in MJ software and my physical guage different
- Replies: 3
- Views: 2980
- Sun Oct 26, 2008 10:17 pm
- Forum: Operation
- Topic: Aux input - Any temp sender or specific one??
- Replies: 2
- Views: 2703