Map switch question.

rally2 · Post by **rally2** » Fri Mar 19, 2004 9:55 pm

What are the electrical requirements when using one of the switchable outputs? Can it handle 12v? Is it grounding only? When will pigs fly?

PS I like the new site Brent.

vw16vt · Post by **vw16vt** » Sat Mar 20, 2004 12:29 am

The output are high/low ground/open circuit, so it's a ground, not a voltage. And use relay to turn on whatever you want.

Math

Luca Lagonigro · Post by **Luca Lagonigro** » Sat Mar 20, 2004 4:43 pm

You can drain 800mA from the 2N2222A.

Post by **brentp** » Mon Mar 22, 2004 9:12 pm

Yep- you should be able to drive a relay with no problems. It switches ground, so the other side of the relay will connect to +12v.