No Display Data using some Channel Names
Posted: Wed Jun 17, 2015 4:53 am
I just received my RCP MK2 and some of the selected channel names do not give outputs on the Windows RaceCapture app Display. If I configure an analog input as an IAT, TPS or EngineTemp I do not see data on the display. I have changed the names to other names and can see changes on the display so the ports are functioning properly. When in the "Customize Channel" popup for IAT it does not list a "units" and the "min/max" lists a range of -1000 to 1000 which matches with the other non functional names. Changing the peramitors to "F" and "0 to 100" or the like do not give functional outputs to the display. I have not had time to investigate any other names that do not work but these do work; EGT, Steering, OilTemp, Coolant, OilPress and EGT. I have not logged data to an SD card and verified weather it is just the display or logging data also.
I have pressure, temperature and linear potentiometers connected to the first six analog inputs. The RCP came with v2.8.1 firmware and I have Race Capture v1.3.2 and v1.3.4 running on Windows 7 64bit.
I wanted to report these issues and have noticed a few others. The Bluetooth rarely functions with a Samsung S4, LG G3 or Blu Dash 5.0. The GPS sometimes fails to initiate or may not see any satellites at all running for over an hour.
Please let me know if you need any more information from me.
Thanks,
Allison
I have pressure, temperature and linear potentiometers connected to the first six analog inputs. The RCP came with v2.8.1 firmware and I have Race Capture v1.3.2 and v1.3.4 running on Windows 7 64bit.
I wanted to report these issues and have noticed a few others. The Bluetooth rarely functions with a Samsung S4, LG G3 or Blu Dash 5.0. The GPS sometimes fails to initiate or may not see any satellites at all running for over an hour.
Please let me know if you need any more information from me.
Thanks,
Allison