Log voltage off of Pin2?

General Q&A specific to RaceCapture/Pro. For app related questions post in the RaceCapture App forum. also see the <a href="http://www.autosportlabs.net/RaceCapture">RaceCapture Information Page</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
sbarton
Posts: 94
Joined: Mon Mar 11, 2013 5:45 pm
Location: NJ
Contact:

Log voltage off of Pin2?

Post by sbarton »

Is it possible to have the system log voltage and just use pin2, since that is hooked up to the power source anyway?

-Scott
Duct Tape Motorsports
MyTrackSchedule.com - Your key to more track events!

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Hi Scott,

Analog channel #8 is internal and not connected to the terminal block and is hard-connected to measure system battery voltage, if I understand what you're referring to.

Just set a sample rate and select the channel name "Battery" and you're good to go.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

sbarton
Posts: 94
Joined: Mon Mar 11, 2013 5:45 pm
Location: NJ
Contact:

Post by sbarton »

Do I need to hook a wire to analog 8 to do that?
Duct Tape Motorsports
MyTrackSchedule.com - Your key to more track events!

brentp
Site Admin
Posts: 6274
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Nope! As before, it's internally wired and not hooked up to the terminal block. You get it automatically.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply