A map for a first start with a 1380 cc with TPS

Browse and share Ignition Configurations in this forum

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
SEB79
Posts: 36
Joined: Tue Nov 18, 2008 10:23 pm

A map for a first start with a 1380 cc with TPS

Post by SEB79 »

hi

My specs :

1380 CC
286 kent cams
7 head ports with twin 40 mm dcoe
10,6 to 1

Thanks for your help.

Sammy D
Posts: 13
Joined: Wed Aug 13, 2008 8:11 pm

Post by Sammy D »

For first start up don't use MJLJ, just pull the plug out, it will run on the EDIS's built in limp mode.

When you've got it going the factory default map will get you going during run-in till you get it to a rolling road for a propper set up.

That's what I was told to do and is what I did with my 1293 Mini with forced induction. No problems.

:)

SEB79
Posts: 36
Joined: Tue Nov 18, 2008 10:23 pm

Post by SEB79 »

first map tested. need to wait better days. Carbies don't like this winter weather. It will be difficult ... it's colder and colder now...
Attachments
7ports.mjlj
(797 Bytes) Downloaded 712 times

Post Reply