Did you see my MJLJ article in this months Retro Cars?

[Josh_b]

i think it generated quite a bit of interest in the project. the reporter chap got a few minor bits wrong in the article, but never mind, hehe

[d4mo]

Hi Josh,
<br>
I saw the article, to be honest it was the main reason I decided to buy the mag this month. I'm in the process of re-building a '78 1500 Midget and my friend has a 1500 spitfire that we intend to fit this system to. Im just trying to get a list of parts and suppliers in the uk to get the kit together. <BR>
Once we have made the first kit and fitted it to my mates spitfire then we might end up fitting one to his dads GT6 converted spitfire.
<BR>
<BR>
Great article though and definetly got my attention drawn to this and your site. What bits did the reporter chap get wrong?

<hr>
<br><a href="http://www.car-worx.com" border="0">
<img src="http://www.car-worx.com/images/banner.jpg">
</A>

[KITT]

Hi Josh,

I too purchased this magazine just for your article on the Megajolt!

I have a question about it though, on page 99, the top right most photo is of a 36-1 toothed wheel which the text underneith mentions is from a Sierra. I wasn't aware of any Sierra's fitted with EDIS, so they wouldn't have a need for such a thing. I hope I'm wrong as I'm going to implement a Megajolt on my 2lt Pinto (from a Sierra) so if there's an off the shelf part that'd be great!

Can you shed any light on the matter?

[Josh_b]

the edis sytem was fitted to sierra's with cvh engines

[Josh_b]

for the gt6 you will need an edis 6 module and coilpack, these are'nt too common in the scrap yards as they were only fitted to some v6 mondeo's, scorpio's and v6 cosworth cars.
there is a caption that refers to the software, but the picture is of my data logging software. i think there may have been something else but nothing major.
good luck with your build