Error light on when attempt to log

radixms · Post by **radixms** » Wed Mar 18, 2015 11:13 pm

Hello, attempted to use the MK2 this past weekend, but when ever I pressed the log button the error light would come on.

I could not find a simple explanation on to view the error log, so before I spend some time and in an effort to save time.

How do I view the error logs?

I did not have a tablet or PC attached the RCP MK2, just attempting to log to review later.

Thanks .

toga94m · Post by **toga94m** » Thu Mar 19, 2015 1:15 am

Does your SD card have a write-protect switch that might have slid when the card went into the RCP?

radixms · Post by **radixms** » Thu Mar 19, 2015 6:06 pm

The Micro SD cards, at least the ones I have, do not have lock switch.

Do the cards need to be prepped for use with the MK2?

How can do I look for the error that it is blinking for?

Post by **brentp** » Tue Mar 24, 2015 9:32 pm

what size card are you using? Ensure it is 32GB or less. Also, you might want to give it a fresh format in your computer.