I likely will not get around to working on this until October. I returned the car to HEI so I can run my Autocross events. I looked at the car again today and the problem is still finding a suitable mount. The two coil packs tend to be heavy when trying to mount them.
Thanks for your help and opinions.
John
Megajolt or MSD problem on EDIS Corvette
Moderators: JeffC, rdoherty, stieg, brentp
The EDIS moudule will work with a variety of coil packs. you might find something lighter and with a packaging configuration that might suit your needs better.
For example the 2nd generation coil pack with flat bottom: http://www.autosportlabs.com/ford-cylin ... -p-61.html; or use 4 of the twinpost coil packs: http://www.autosportlabs.com/universal- ... -p-60.html
Keep us posted on your project!
For example the 2nd generation coil pack with flat bottom: http://www.autosportlabs.com/ford-cylin ... -p-61.html; or use 4 of the twinpost coil packs: http://www.autosportlabs.com/universal- ... -p-60.html
Keep us posted on your project!
Wiring Diagram
Here is a diagram of the system I built with 2 MSD DIS-4 modules. I am completing a digram with 1 DIS-4 module. In either case the same problem occurs.
- Attachments
-
- Dual DIS-4.jpg (203.04 KiB) Viewed 5484 times