TPS fitting

EDIS and Megajolt installation related topics. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide">Vehicle installation guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
lotuselanman
Posts: 4
Joined: Sun May 08, 2011 9:32 pm
Location: QLD, Australia

TPS fitting

Post by lotuselanman »

Gidday,
A newby from the Antipodies who is on a very steep learning curve.
Fitting the Wabash TPS as supplied with the MJ.
The hole ID on the TPS is 8mm, the OD on the Weber shaft is 6.5mm.
Is there a spacer available or do I make one.?
Thanks,
Les.

luxseven
Posts: 27
Joined: Mon Jan 31, 2011 9:21 am
Location: Luxembourg
Contact:

Post by luxseven »

Hello Les,

Here is how I solved it, but you may find ready-made ones (Weber).
Cheers.

Jos
Attachments
Adapter (selfmade)
Adapter (selfmade)
axis_profile.JPG (28.59 KiB) Viewed 5119 times
trial fit
trial fit
TPSadaptor.JPG (19.2 KiB) Viewed 5119 times
Last edited by luxseven on Fri May 13, 2011 7:59 am, edited 1 time in total.
If all else fails, consult the manual.
My blog: http://jacob-jos.blogspot.com/

lotuselanman
Posts: 4
Joined: Sun May 08, 2011 9:32 pm
Location: QLD, Australia

TPS.

Post by lotuselanman »

Gidday Luxseven,
Thanks for the reply, food for thought.
Travelled through your beautiful country when completing in a Classic car rally in 1999.
Les.

Post Reply