Autosport Labs

next up: got my bluetooth module and shift x in. https://farm4.staticflickr.com/3907/14557015667_6e862b92fc_b.jpg https://farm4.staticflickr.com/3867/14556825098_1f6b2ffa51_c.jpg https://farm6.staticflickr.com/5583/14743180252_0604792ce3_c.jpg i'll try to mount this guy here somehow. i need to redo ...

here is the data aquisition unit mounted up: https://farm4.staticflickr.com/3855/14565891392_a5ac067aa8_c.jpg ran the harness i built in the car. this will allow me to easily connect sensors to the unit: https://farm4.staticflickr.com/3886/14565035764_a771364dc8_c.jpg mounted 10hz gps sensor for lap...

there are 20 pins on the unit so i decided, why not use a 20 pin motherboard ATX harness? (NOTE: i came to later discover the green wiring block on the RCP was removable :\) https://farm4.staticflickr.com/3867/14361425210_f4d3bc9c85.jpg cut. https://farm4.staticflickr.com/3875/14361467899_2b4c1cc97a...

Figure it's time for an update on my install. I had already installed a Nexus 5 2nd gen tablet in my Evo for music/nav+ https://farm3.staticflickr.com/2938/14142642529_c1084d18e2.jpg https://farm6.staticflickr.com/5112/14329288615_a3d132b54d.jpg The install is wireless/removable. Audio is bluetooth,...

It seems like anytime I touch the RUN button in the scripting section of race analyzer, it crashes my RCP and it no longer show in device manager under Ports (COM..) .

I have to redo using flashRCP.bat

I am on v1.1.15 and FW 1.2.8

the manual says i can invert but wasnt clear.

if my RCP unit is installed like this:



then my configuration should be as follows correct?

sounds good. thank you!

as far as getting the resistance of a sensor, if that wasn't part of the specs, i should just be able to measure it using a multimeter right?

Hello,

Just a quick question about the +5V reference output from the RCP unit. Is that safe to drive multiple analog sensors (maybe 4 sensors) from that single 5V lead?

Thanks.

i'm already ready to buy the obd2 device as well.

as soon as i have it, i'm confident i can make it do some wicked stuff with the mitsu evo X ecu.

just a note, with windows 8, i was unable to update firmware (from 1.1x to 1.2x) windows 8 recognized the device fine with 1.1x firmware using the non V2 drivers but during the update process, the firmware update utility never found the device. this occurred on both my windows 8.1 machines. i tried ...

Before I started shopping, I felt like it was common place to find gauges that did dual function (temperature and pressure). I wanted to buy a single sensor with dual analog out in order to get a read on both oil pressure and oil temperature. I was also interested in running it on the fuel side for ...

thanks!

got my Race Capture Pro in yesterday.

Hello everyone, My name is Mo. I drive/race: '12 Mitsubishi Evolution X (road/circuit race) '03 SVT Cobra (drag race) Triumph Daytona 675 (no race... too chicken) Also a 1/5th owner of our team chump/lemons car (endurance race). Then toss in a bit of karting. Hell, even have a racing simulator setup...