Search found 141 matches
- Fri Nov 07, 2008 12:43 am
- Forum: Q&A
- Topic: Backfiring through Carburettor
- Replies: 14
- Views: 11294
Its difficult to tell from the angle of your photo there... Are you sure the center metal pole of the VR sensor is aligned accurately with the center of the holes drilled in your pulley ? It looks like the VR sensor may be aimed slightly *inside* the hole circles. that gap looks pretty wide too.. If...
- Tue Sep 30, 2008 12:40 pm
- Forum: Future Upgrades
- Topic: Mods to V3 unit for Aux input
- Replies: 8
- Views: 19791
- Tue Sep 09, 2008 12:16 pm
- Forum: Future Upgrades
- Topic: 3.3.0 Configuration Software (beta)
- Replies: 20
- Views: 62680
Flag Current Cell Key ?
A possible enhancement.. how about changing the color of the cells that were in effect when a "mark event" occurs during a log ? So you can run a logging session, tap the mark at any pinging or blips, and then easily see where on the 2d or 3d maps what cell was in use at the marked moment ...
- Wed Jun 04, 2008 5:31 am
- Forum: Future Upgrades
- Topic: MJLJ V4 in testing
- Replies: 46
- Views: 85103
Angle sensitive Aux/Knock input ?
Greetings Brent. A question regarding the Aux input as a possible kock retard. Is the MJ aware of the current engine angle ? Or is it just the Edis module that knows that ? I was wondering if the Aux retard input could be made active only between certain angles, since the problem with knock sensors ...
- Thu Jan 03, 2008 10:22 am
- Forum: Operation
- Topic: MJLJ Stimulator...with some pics
- Replies: 9
- Views: 8019
Thank you very much Martin ! Got them open in AVR Studio and perusing them now. AVR Assembly code is new to me ( did some 90s1200 code a few years ago), but I've done plenty of coding on Pics, Z8's, 68x and so on, they're all similair, so its looking straight forward enough. get an ADC input, use th...
- Wed Jan 02, 2008 1:01 pm
- Forum: Operation
- Topic: MJLJ Stimulator...with some pics
- Replies: 9
- Views: 8019
Hi Martin I relaise this is an old thread, but I have just completed two Megajolt/EDIS's, and am interested in the source code to your driver micro if you will share it. I have AVR programming facilities, and even a ATTiny on the shelf !, so is you code and a diagram available please ? regards Brett