Autosport Labs

Alright, alright, alright...I've answered my own question. My CANBUS script set the maximum value to 105 for MAP. Here is the script: --add your virtual channels here --addChannel(<name>, <sample rate>, [logging precision], [min], [max], [units label]) rpmId = addChannel("RPM", 10, 0, 0, 8...

I have a RCP MkIII and am running the RCP app on a Kindle Fire. App and firmware are latest versions available as of 2 weeks ago. I have been successful mapping several CANBUS channels from a microsquirt. The challenge I am having has to do with being able to scale the gauge on the dashboard. For ex...

Got the freedompop sim, installed it, configured it, cycled the power a couple of times, and, it works! Before I could get it to work, however, I had to toggle a number of settings having to do with data logging and background streaming. Honestly, I am very confused as to how this is all to work. Th...

@Brentp thanks. I placed the order. I will update once it arrives. Thanks for the info.

Looks like the free one is no longer available. Which one will work?

Just got off the phone with ATT. They tell me that my SIM card is 4G/LTE and not 3.5G as I requested when I got it at the ATT store. Further, they tell me that they cannot provision the SIM to 3.5G and rather I have to go back to a store and get a new 3.5 SIM. Does this correlate to others' experien...

It does. Thank you.

If I want to log engine data (temps, pressures, RPM, AFR, MAP, etc) plus driver data (GPS, speed, brake pressure, steering angle) for an 8 hour endurance race how large of a micro SD card do I need? Assume I am capturing data at normal frequencies for the given sensor. For example, will something li...

Here is what I have setup for fuel level. The trouble is that I don't believe (but don't really know) that there is 10 gallons of fuel in the car. It is entirely possible but I am not certain.

I will get a screen shot up as soon as I can get to the car. I am not able to easily manually manipulate the fuel level sender as it is installed in the tank and a huge hassle to get to.

Everything seems to be working great with the exception of the fuel level sender. This is what I have wired: https://i.imgur.com/UlXwyt0.jpg Before I put the fuel sender in the tank, I connected it to a multimeter and measured the resistance with the float at the top (full - 2.6 ohms) and bottom (em...

The presets certainly helped me understand more about how to calibrate the sensors.

Thank you. This is helpful. I got through a lot via trial and error. Also, working from my laptop helped a ton. One of the things that I did that moved me along was to simply monitor voltages to make sure everything was connected properly. Once I did this I found a wiring mistake. After the wiring w...

I've looked through the website and have not found any documentation about setting up analog sensors. Here is what I have: Oil Pressure - 0-100 psi 3 wire sensor Oil Temperature - GM style with 2.2k pull up resistor Coolant Pressure - 0-30 psi 3 wire sensor Fuel Rail Pressure - 0-100 psi 3 wire sens...