The supplier has confirmed that the EDIS was indeed dead and has supplied a replacement which is working a treat
Thanks for all your help guys….
Search found 4 matches
- Fri Apr 15, 2011 12:23 pm
- Forum: Installation
- Topic: Rover V8 problems
- Replies: 7
- Views: 12651
- Tue Apr 12, 2011 8:06 pm
- Forum: Installation
- Topic: Rover V8 problems
- Replies: 7
- Views: 12651
The wheel was also provided as part of the installation kit, the sensor is as close as I can get without it physically being damaged during the rotation of the crank. I’ve managed to get an oscilloscope from work and measured the wave forms as per the images. Fortunately the supplier of the EDIS mod...
- Mon Apr 11, 2011 8:14 pm
- Forum: Installation
- Topic: Rover V8 problems
- Replies: 7
- Views: 12651
Still no luck, :( With the Megajolt disconnected, I've removed a couple of plugs and ground them on the engine block and can confirm there is no spark. The coil packs will spark with the EDIS disconnected and a manual *momentarily* short to ground created. As for the EDIS coil packs, these are the o...
- Sun Apr 10, 2011 5:53 pm
- Forum: Installation
- Topic: Rover V8 problems
- Replies: 7
- Views: 12651
Rover V8 problems
Hi folks, I’ve just installed a Megajolt system in my Land rover with a 3.5L rover V8 engine and I’m having problems getting the system to spark in “limp home” mode or with the MJ fitted I’m currently getting no spark at all, even if I switch the polarity of the VR sensor wires Running through the v...