Autosport Labs

Hi I am trying to run my Merc 560 V8 and firing order is 1-5-4-8-6-3-7-2 so which pairs got to Spark A-B-C-D any help appreciated, Regards DM

Hi, I have got my Megajolt Lite JR all wired up and I am getting a spark, my firing order is 1-5-3-6-2-4 so all I am stuck on is how to connect leads to my coil pack as I have read somewhere that the Edis coilpack with Edis module is fired A-C-B pairs and not A-B-C ? so any help appreciated, Regards...

So do you measure voltage on the input of the voltage regulator U3? See: http://www.autosportlabs.net/asl_dist/mjlj/mjlj_v4_sch.png You can also test on either side of D1 Hi Brent Thanks, on the left side of D1 I get Zero v and on the right side I get 0.3v Regards DM Hi Brent sorted, I redone the j...

brentp wrote:So do you measure voltage on the input of the voltage regulator U3?

See: http://www.autosportlabs.net/asl_dist/m ... v4_sch.png

You can also test on either side of D1

Hi Brent Thanks, on the left side of D1 I get Zero v and on the right side I get 0.3v Regards DM

Your wall adapter might be putting out too much voltage- sometimes the voltage regulation isn't as precise as they claim. Can you verify the voltage the adapter is putting out ? A good alternative is to test with a fresh 9V battery. Hi Brent Thanks, my adaptor ( It is a regulated one) is putting ou...

Hi I built this V4 about 2 years ago and all I can is assume that all was well and tested after I built it, so now I get it out to fit to a friends MGC and just to familerise myself connected to my PC but soon realised it was not connecting as Led did not come on onced powered I have a wall wart reg...

DannyP wrote:Yes, as long as it is a four-stroke. You would just get a single coil-on-plu or coil near plug. Then you would leave one of the coil trigger wires unconnected. You'll still need a VR sensor and a 36-1 trigger wheel.

Thanks Dannyp, Regards DM

Hi will any MLJL run a single cyclinder engine, Thanks DM