Autosport Labs

Saw signal was at fault. Has someone got a basic map with the correct loads on the side? For example if i go upto 100 how will megajolt know where to "zero" it. As in i dont want to put 10-20-30 etc upto 100 then on idle its at 70... So basically has anyone got a good Zetec map on Carbs? :...

Anyone?

Hi guys, first up ill put the spec Megajolt v4 2.0 Zetec Twin 45s Newman Cams and Verniers etc Right, the problem I have is that I can load up and read my Megajolt ECU. It shows everything, shows where its at on the map etc. I took it to my rolling road today to have the cams setup and adjust the sp...

Thought id update it for you. Took a complete desktop computer over the garage, connected it up via Serial port and worked straight away. Slightly annoying so think im gonna buy a cheap old laptop just to plug into megajolt

Hi mate, yea installed the drivers and even downloaded the updated ones. Gonna see if i can borrow a laptop witha serial port and will report back

Hi Brent. Ill check tomorrow with the timing light to see if it differs when i plug megajolt in. Part of me thinks it is as it runs a little worse with it plugged in. But like i say i will check. I have made sure the com ports are the same. Ive even changed it manually and set both to 6 and still no...

Anyone?

Anyone got a map for a 2.0 Zetec on 45DCOE? Need a basic one to get me going!

I am unable to connect to my megajolt unit using my laptop. Spec is as follows: Laptop using Windows 7, Prolific USB to Serial Adapater with Latest Drivers. Megajolt is working as the green light is on! I have put it on the basic wiring system on the EDIS setup on a 2.0 Zetec at the moment but every...

Anyone got a nice simple diagram i can follow? Im going to be using the flywheel sensor and cam shaft sensor. Im running bike carbs, also is there a way to have a rev limiter? Thanks